18:56
Wood repair
A Common Wood Repair Method
Follow a beginner-friendly wood repair from leveling hard wax to painting in the grain.
Explore real repairs taught by Takeshi Hirano with English captions. Watch three free previews or browse the full catalog. Members can watch the full lessons.
95 lessons
18:56
Wood repair
Follow a beginner-friendly wood repair from leveling hard wax to painting in the grain.
15:43
Wood repair
See how small additions of color shift a hard wax mix toward the tone of the surrounding wood.
4:50
Repair fundamentals
Compare putty grades and see how the base and hardener come together in a uniform mix.
12:54
Repair fundamentals
See when a second pass of filler helps level a low spot before sanding.
11:48
Wood repair
Build up coverage over the filled area and adjust the gloss to match the adjacent white trim.
19:32
Wood repair
Follow an everyday gouge repair that uses hard wax and simple layers of color to suggest the grain.
41:25
Wood repair
See how the repair is sealed and how the color and sheen are checked from an angle.
18:34
Wood repair
See how hard wax techniques are applied to several individual marks on a new-build job.
17:30
Flooring
Use adhesive to stabilize a slight crack and fill the dent before matching the floor's sheen.
Watch free preview of Repairing a Floor Dent with Adhesive · 0:55
25:08
Aluminum frames
See how far the metal can distort around a visible dent and how the filler edges are tapered.
5:21
Aluminum frames
Compare the sanding approach for a shallow scratch with the repainting needed for a deeper mark.
7:56
Aluminum frames
See how straight strokes recreate a brushed finish and how lighting changes its visibility.
59:01
Color matching
Watch color adjustments up close, including how gray softens an overly vivid mix and how the color is checked on the surface.
39:45
Aluminum frames
See why metallic flake size and the width of the paint blend matter when matching a sash finish.
11:12
Wood repair
Follow the transition from sanded filler and adhesive to the first light coats of paint on a baseboard.
8:48
Aluminum frames
Follow a film-covered trim repair from removing loose material to painting the filled areas beside wallpaper.
25:51
Repair fundamentals
Compare preparation for a hole, a printed finish, and a painted door surface.
48:29
Flooring
See how masking protects the floor during sanding and how small variations in painted grain help blend a deep cut.
17:37
Flooring
Learn how to keep gel adhesive out of the board seams while working on several dents.
19:29
Tile & surfaces
Compare adhesive for shallow marks with color-matched hard wax for a deeper gouge on the same countertop.
38:24
Wood repair
Follow the filled and painted door through sanding and polishing to bring back the gloss.
1:00:11
Flooring
See how water-based color, a spattered pattern, and a urethane clear coat are used on a high-gloss floor.
33:16
Tile & surfaces
Follow preparation and polishing on a kitchen panel, then see how the finish looks when checked upright.
3:15
Stainless steel
See how sanding along the brushed grain and finishing with an abrasive pad blend a scratch on a threshold.
8:12
Stainless steel
See how to keep a polisher moving over fine scuffs and work around the edges of a new sink.
6:14
Tile & surfaces
Follow sanding and compound polishing to restore the reflection on a washbasin.
21:19
Wood repair
See how the filler, primer, and white topcoat are prepared for a front door repair.
13:15
Wood repair
Follow a front door repair on site, including a dab test to check the adjusted paint before spraying.
22:48
Flooring
See how color and sheen are adjusted before light passes of paint build up the match on worn flooring.
4:12
Coated steel
Follow the repair from leveling the raised edges around screw holes to building up the primer in light passes.
27:54
Wood repair
See how wax and gel adhesive level screw holes inside a shoe cabinet before the surface is color matched.
24:34
Wood repair
See how gold wax mixed into the paint helps a solid wood patch change appearance with the viewing angle.
34:28
Wood repair
Compare brush techniques for painting fine grain lines and adding tonal variation to decorative plywood.
13:44
Tile & surfaces
See how the holes are filled and the first color coat is confined to the exposed gray areas on a bathroom panel.
27:32
Repair fundamentals
Learn how to compare the repair with a neighboring board from the side and fine-tune its sheen.
40:01
Coated steel
Follow a Galvalume siding color match and see how tilting the panel and adjusting its sheen change the comparison.
8:13
Repair fundamentals
Compare dry and wet coats and see how overlapping passes work on wider and narrower spray areas.
25:56
Tile & surfaces
See how progressively finer polishing and a gradually wider working area bring back sheen around an etched spot.
27:13
Tile & surfaces
Follow the progression from abrasive pads to polishing powder and a cotton buffing pad.
29:10
Tile & surfaces
See how a matching insert is tapered, fitted, and trimmed flush to repair a crack in a solid-surface countertop.
41:40
Flooring
See how changing the viewing angle reveals haze and helps judge the sheen against textured flooring.
37:29
Exterior repairs
See how a stamp starts the texture of a siding patch before the pattern is adjusted by hand and painted.
49:15
Exterior repairs
Compare brush-spatter patterns while recreating the texture around a scored crack in a wall sample.
36:57
Exterior repairs
See how the repaired eave is painted and lightly weathered to match the existing finish.
9:46
Aluminum frames
See how to feather a paint edge in different directions and keep the painted area small on an aluminum post.
10:46
Tile & surfaces
See why a clear filler is used on engineered quartz and how excess filler is removed after it hardens.
45:40
Flooring
Build wood grain with light strokes of water-based color, leaving small gaps to vary the pattern.
1:13:18
Wood repair
See how sanding changes the appearance of the surface before color is built up on the cabinet door.
5:18
Appliance finishes
Follow a range hood scratch from gel adhesive and primer through the final sheen adjustment.
17:29
Tile & surfaces
See how a silicone stamp captures a surface pattern and transfers it to fresh filler.
23:21
Flooring
See how liquid adhesive is built up in a scratch and why preserving the floor's embossed texture matters.
17:11
Wood repair
Use a fan brush to paint spaced grain lines over the restored color on worn wood paneling.
8:04
Tile & surfaces
Follow a chip repair on a Takara Standard enamel washbasin, from scuffing the area to applying the matching paint.
6:37
Flooring
See how a groove is scored again after filling and how folded sandpaper follows the new line.
37:23
Tile & surfaces
Follow filling, painting, and finish sanding on a cracked ceramic washbasin.
34:47
Exterior repairs
See how water-based color is adjusted for the fine speckling and grooves in exterior siding.
29:29
Exterior repairs
Follow a scratch repair on a grooved resin deck board, where matching the original profile is part of the job.
30:36
Tile & surfaces
Follow the progression through granite polishing pads and see how the surface gloss is measured.
17:47
Appliance finishes
See how primer-surfacer covers the edges of the filler before a urethane finish and clear coat are applied.
26:11
Flooring
Follow a repair in a vacant rental from filling floor damage to blending the color and grain.
14:27
Stainless steel
See how dents are tapped from underneath and how abrasives are used without sanding away the surrounding texture.
17:10
Tile & surfaces
See how liquid and gel adhesive are applied in sequence before the countertop repair is sanded level.
26:10
Flooring
Follow a long floor scratch from hard wax filling to sealer and a spray finish built up in passes.
7:58
Coated steel
Level a low spot with putty, then see how primer, a light first color coat, and clear coat are applied.
12:16
Color matching
Compare the same charcoal metallic sample from different angles and see where it takes on a brown cast.
6:43
Color matching
See how red and yellow tints are used to adjust a Panarock gold mix.
7:45
Color matching
Compare a Panarock silver metallic test panel with the SP Birect finish in daylight.
9:17
Color matching
See how two metallic grades and color tints are combined for a gunmetal finish that looks browner at an angle.
5:38
Color matching
Follow a weighed, matted Smart Brown mix through painting and an outdoor comparison.
5:43
Color matching
Compare the Cool Brown test panel with the original in direct sun and shade.
9:31
Color matching
Follow a Moss Green mix through an outdoor check and note that the original finish can vary between batches.
6:00
Color matching
Follow the Cool Brown test panel outdoors and use the closing formula as a reference for the weighed mix.
4:32
Color matching
See a Custard Yellow sample sprayed and checked against the original panel outdoors.
6:21
Color matching
See how the painted Cool Black sample compares with the original outside and in shade.
6:22
Color matching
See how the ridged Galspan profile affects the viewing angle when comparing a Neo Black match outdoors.
5:17
Color matching
Follow small additions on a precision scale and compare the finished matte black panel against the light.
4:38
Color matching
Follow a match for Neo Black on the Galstage Shine profile and see the test panel checked outdoors.
5:10
Color matching
See how a fine metallic pigment is used for the Isoband sample, then compare it with the original outdoors.
5:29
Color matching
Compare a Panarock urethane mix with an ES1 aerosol reference panel in daylight.
3:51
Color matching
See where Deep Blue enters the Grand Blue mix and how the sprayed panel looks against the original.
3:35
Color matching
Follow a Panarock Dark Gray mix and see how the test panel is assessed when rain prevents an outdoor check.
4:13
Color matching
See why a Bitter Brown test coat was redone when the first application came out too glossy.
3:59
Color matching
Follow the weighed Mist Ivory mix and see how rain affects the outdoor comparison.
4:22
Color matching
Compare an SS1 urethane test panel with the aluminum window frame color reference outside.
3:43
Color matching
Follow the preparation of an ES0.5 urethane test panel and its comparison with the reference outdoors.
3:48
Color matching
See how small tint additions shift a White Metallic base before the SS0.5 sample is checked outdoors.
3:38
Color matching
See how a small metallic addition and a flattening agent are used for EK1 Black, then compare the painted panel in daylight.
3:52
Color matching
Follow the SS2 urethane mix through a side-by-side outdoor comparison with the reference panel.
3:05
Color matching
See how a urethane test panel is mixed and checked against the SS4 spray color used on aluminum window frames.
3:11
Color matching
Follow the preparation and spraying of a bronze color sample.
2:33
Color matching
Check a bronze sample against the target color under outdoor light.
Watch free preview of EC-1 Bronze Color Matching · 0:45
3:44
Color matching
Compare a metallic bronze test finish against the original surface.
26:42
Tile & surfaces
Rebuild a damaged area and recreate the texture of the surrounding tile.
Watch free preview of Porcelain Tile Repair · 0:52
3:29
Appliance finishes
Compare a silver test panel with the original range hood finish.
2:38
Appliance finishes
Match a painted sample to an existing white appliance panel.